Expert Answers about Lunette Ring
- Availability of Lunette Rings Smaller than 3 Inches
- We carry a 2-1/2 inch Lunette ring that has a four hole flat mount base, item # C48550. Other than that our Lunette rings are 3 inches. We do have other couplers that bolt to your trailer tongue, like part # DM12141-81. I've also linked the rest of our selection.
You will need to be sure the mounting blot pattern is the same and that the weight capacity is high enough for the trailer you are pulling.
view full answer... - Storage Lock For a Lunette Ring Coupler On a Trailer
- We have the Blaylock EZ Lock Trailer Coupler Lock for Lunette Ring Couplers # BLTL-60-40D that fits a 2-1/2" or 3" lunette ring. This device is constructed of aluminum for corrosion resistance and accepts a PadLock # ML40D to secure to your trailer.
You can also use a The Wheel Club - Tire and Wheel Lock # WI490 that fits tires up to 28" in diameter and 9" wide for added security.
view full answer... - Do You Offer a Lunette Ring With 4 Bolt Mounting Mounting Flange 5" x 3-3/4"?
- I have an option for you as a 4-1/2" square bolt Flange # 337TNP716750100 is the more common size. This would accept the Buyers Products 2-1/2" I.D. 4-Bolt Welded Mount Lunette Ring # 337BDB125015W. I recommend having the Buyers Products 5-Position Adjustable Lunette Ring with 3" Heavy-Duty Channel # 337B20145 welded to the front of your trailer tongue. This will make much easier to adjust the couple to different heights if used with different trucks.
view full answer... - Lunette Eye With Similar Load Ratings For a 50 Ton Pintle Hitch
- Our heaviest rated bolt on Lunette Eye # 337BDB1394 is rated for 90,000lbs.
Buyers Products does offer a 3" I.D. And 6-1/4" O.D. Forged Lunette Eye # 337LW847 that does not have a weight rating due to it not having a mounting connection. The final weight capacity will depend on the mount type and quality of the weld in final application form. This is something that you will want to have done by an experienced welding shop that has experience with these parts.
view full answer... - Tow Bar With Capacity Above 10,000 lbs
- There is one tow bar rated above 10,000 lbs and it is the Blue Ox Trion Tow Bar - Lunette Ring - A-Frame - Car Mount - 20,000 lbs # BX7520P. There is not currently another option between 10,000 lbs and the 20,000 lbs lunette ring tow bar.
view full answer... - Replacement Inner Slide for Titan Model 20 Surge Brake Actuator
- Currently there is no replacement inner slides for your Titan Brake Actuator # T4750700 besides the 2-5/16" that you currently have.
We do have Titan Adjustable-Channel Brake Actuator # T4821300 that has an adjustable channel and includes the lunette ring. It is the same 20,000lb brake that fits the 3" frame.
view full answer... - Channel for an Adjustable Lunette Ring Trailer Coupler
- The adjustable lunnete ring, # 63036 comes with the channel. The channel itself is not 6 inches wide. It is the outside diameter of the ring that is 6 inches. The channel width is approximately 3 inches. The nuts and bolts are included as well. I have linked a video review for you. I have also linked the channel brackets we carry. A six inch wide option is not available.
view full answer... - Lunette Ring Tow Bar Recommendation for Flat Towing 2004 Chevy Silverado
- For a tow bar we have the Roadmaster Stowmaster part # RM-583 which has a 6k capacity and uses a 3 inch Lunette ring. So then for a base plate kit you'd want the part # 3115-1 for if you have a 1500HD, 2500HD, or 3500HD.
If you have a 1500LD Z71 you'd want the part # 199-5 or part # 199-10 for if you have a 1500LD that's not a Z71.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring...
view full answer... - Difference In Pintle and Regular Mount, and Availablity of Pintle Mount For 2011 Ford F-350
- A pintle hitch ball is designed to be used with trailers that use Lunette Rings, a regular or conventional hitch ball is designed to be used with trailers that have couplers. You would typically find trailers with Lunette Rings on industrial or construction type trailers.
For a pintle towing setup, you will need a pintle draw bar, pintle ball, pin and clip, wiring, and brake controller.
For a draw bar, I would recommend Titan Forged Pintle Hook Mounting Plate, part # RP45294, which will...
view full answer... - Mounting Hole Diameter and Spacing of Pintle Eye T1613700
- We have several 3-inch lunette ring (pintle eye) couplers that are shown on the linked page. These are offered with and without a channel mount, such as # T1812800 and # T1613700, respectively.
I went to our warehouse and measured the hole size and spacing on part # T1613700. Each hole is indeed 5/8-inch diameter and their centers are spaced apart by 2-inches.
view full answer... - Availability of Base Plates for Towing a 2009 Ford F-250 Super Duty and
- There are two base plate options for your 2009 Ford F-250 Super Duty. The one I recommend is the most common and will accommodate the most options and tow bars. This is the Roadmaster XL Base Plate Kit, item # 4412-1, which has removable draw bars and is designed specifically for your truck.
There is also the Roadmaster MX Base Plate Kit, item # 4412-3, which is also designed for your truck and has removable draw bars. The difference with this kit is that the draw bars will not accept...
view full answer... - Is There A Ball Mount Coupler Adapter Available For The Blue Ox Trion Tow Bar
- I confirmed with Blue Ox that the Welded Coupler Adapter for Blue Ox Allure Tow Bar - 2-5/16" Ball # BX88259 does not work with the Blue Ox Trion Tow Bar for Pintle Hitch # BX7520P and that there is not currently another adapter available. If you wanted the ability to swap between a pintle hitch lunette ring and ball coupler then you would have to use the Blue Ox Allure Non-Binding Tow Bar # BX7460P instead.
view full answer... - Can an Order for Multiple Tow Ready Locks Be Keyed the Same
- Many of the lock products we offer can be ordered in multiples that are keyed alike and some of the Tow Ready brand locks are among these. The link at right will take you to our main page for locks that can be keyed alike, such as our coupler lock # e98888.
You can use the filters on the linked page to select the type of locks you need - gooseneck, lunette ring, standard coupler, etc.
Once you select the product you want you can select the Keyed Alike option from the drop-down menu above...
view full answer... - Pintle Hook Mount Plate and Hook Recommendation with 20k Capacity for 2-1/2 inch Hitch
- For a pintle mounting plate with a 20k capacity that is designed to fit a 2-1/2 inch hitch we have the Buyers Products part # 337PM25812 as the Curt you mentioned only has an 18k capacity. Then for a hook to bolt onto this we have the part # C48215 which has a 30k capacity.
view full answer... - Availability of an Adjustable Pintle Hook Mount for a 2-1/2 Receiver With 20,000LB Trailer Capacity
- I do have a couple options for you as the Pro Series Adjustable Pintle Hook Mounting Plate 63072 is only available for a 2" receiver with 14K weight capacity. We do have the Curt Pintle Hook with 2-5/16" Ball # C45908. This is rated for up to 20,000lbs with either the ball or pintle mount and fits 2-1/2" or 3" lunette rings. The Lock Set # C23556 will allow you to secure this to your receiver.
If you prefer to have a more comfortable ride when towing you will want to use the Gen-Y Torsion...
view full answer... - Adjustable Ball Mount With 1-7/8", 2", 2-5/16" and Pintle Lock Capabilities
- The only hitch we currently carry that has all 3 ball sizes along with a pintle lock is the Patriot Hitches 5-Way 3-Ball Mount and Adjustable Drop Hitch Adapter # PH94FR. As this is limited in weight capacity to 7,000lbs due to the drop receiver I have a better option for you.
The BulletProof Hitches system will allow you to have everything you are looking for with their easy to change removable accessories. First you can select a ball mount system.
BulletProof Hitches Adjustable 2-Ball...
view full answer...
Go To Results